xTool F1 Ultra (Fiber) — Titanium
2 community-tested settings for mark Titanium on the xTool F1 Ultra (Fiber). Always run a test on scrap material first.
Where to buy
Buy the xTool F1 Ultra (Fiber) — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover mark Titanium on the xTool F1 Ultra (Fiber) (2W fiber laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
2 settings
Frequently asked questions
What speed should I use to mark Titanium on the xTool F1 Ultra (Fiber)?
The top-rated community setting uses 1200 mm/s at 85% power. Color marking possible. Vary speed to shift hue.
How many passes does the xTool F1 Ultra (Fiber) need to engrave Titanium?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Titanium on the xTool F1 Ultra (Fiber)?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Titanium
Templates ready to cut on your xTool F1 Ultra (Fiber) once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris