xTool F1 — Chrome Plated Steel
2 community-tested settings for engrave, mark Chrome Plated Steel on the xTool F1. Always run a test on scrap material first.
Where to buy
Buy the xTool F1 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and mark Chrome Plated Steel on the xTool F1 (2W fiber laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
2 settings
Frequently asked questions
What speed should I use to engrave Chrome Plated Steel on the xTool F1?
The top-rated community setting uses 1500 mm/min at 85% power. Deeper mark through chrome plating into base steel. Good for permanent ID on tools and hardware. Mark may show slight colour variation at chrome/steel boundary. Single pass sufficient for most plating thicknesses.
How many passes does the xTool F1 need to engrave Chrome Plated Steel?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Chrome Plated Steel on the xTool F1?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Chrome Plated Steel on the xTool F1?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with Chrome Plated Steel
Templates ready to cut on your xTool F1 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris