xTool F1 — Coated / Powder Coated Steel
1 community-tested setting for mark Coated / Powder Coated Steel on the xTool F1. Always run a test on scrap material first.
Where to buy
Buy the xTool F1 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 1 setting cover mark Coated / Powder Coated Steel on the xTool F1 (2W fiber laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
1 setting
Frequently asked questions
What speed should I use to mark Coated / Powder Coated Steel on the xTool F1?
The top-rated community setting uses 300 mm/s at 100% power, 2 passes. Powder coat is easier to ablate than bare metal. 2W can remove coating to expose steel, but results depend heavily on coating thickness and color. Thin coatings work in 1–2 passes; thick industrial coats may need more. xTool LightBurn forum painted tumbler data used as reference. | Freq: 40kHz, line interval: 0.05mm
How many passes does the xTool F1 need to engrave Coated / Powder Coated Steel?
Settings here range from 2 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Coated / Powder Coated Steel on the xTool F1?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Coated / Powder Coated Steel
Templates ready to cut on your xTool F1 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris