xTool F2: 3mm MDF
2 community-tested settings for engrave, cut 3mm MDF on the xTool F2. Always run a test on scrap material first.
Where to buy
xTool F2: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut 3mm MDF on the xTool F2 (15W laser laser). Wood results vary by grain direction and moisture content: always run a quick test on scrap before cutting your final piece. Some settings use multiple passes for a cleaner cut: pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to engrave 3mm MDF on the xTool F2?
The top-rated community setting uses 2500 mm/min at 55% power. 20W-class diode baseline — consistent with other 20W diode machines in the settings database (Atomstack X20/A20/S20 Pro, Ortur Laser Master 2 Pro, xTool S1 20W). Always test on scrap first; individual units vary.
How many passes does the xTool F2 need to cut 3mm MDF?
Settings here range from 1 to 3 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for 3mm MDF on the xTool F2?
Yes: 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the xTool F2 for 3mm MDF?
The xTool F2 works with xTool Studio and xTool Creative Space. Enter the speed, power, and passes directly into your software's layer settings: no conversion needed.
Now make something with 3mm MDF
Templates ready to cut on your xTool F2 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris