xTool S1 — Pine
2 community-tested settings for cut, engrave Pine on the xTool S1. Always run a test on scrap material first.
Where to buy
Buy the xTool S1 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Pine on the xTool S1 (40W diode laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece.
2 settings
Frequently asked questions
What speed should I use to cut Pine on the xTool S1?
The top-rated community setting uses 500 mm/min at 100% power. Pine cuts cleanly in 1 pass at 40W — one of the easier softwoods for diode. The S1's air assist handles the resin smoke well. Check sheet flatness first. Fast single-pass cutting is one of the S1's strengths for softwoods.
How many passes does the xTool S1 need to cut Pine?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Pine on the xTool S1?
Yes — 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the xTool S1 for Pine?
The xTool S1 works with xTool Creative Space. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Pine
Templates ready to cut on your xTool S1 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris