ACMER P2 33W — 3mm Basswood Plywood

Very fast raster engrave at 8000mm/min. 28% gives a warm medium-brown mark without burning. The P2's large 400×400mm bed handles standard coaster and sign sizes well. Increase to 40% for darker marks on denser wood batches.

The P2's 33W compressed beam cuts 3mm basswood in one clean pass at moderate power. Air assist is built in and essential. At 72% you preserve tube life while getting reliable single-pass cuts. The P2 competes directly with the Sculpfun S30 Pro at similar wattage and price.

High speed engrave leveraging the P2's 30,000mm/min rated speed and linear guide rails. Use dynamic power mode. Result: good contrast with minimal charring. Bump to 55% for deeper/darker mark. Always run a material test grid first.

33W with included air assist makes light work of 3mm basswood in a single pass. Optimal range tested: 70–100% power at 800–1100mm/min. Air assist included as standard — always use it for cutting. Constant power mode. Check flatness of sheet.