ACMER P2 33W — Ceramic Tile
1 community-tested setting for engrave Ceramic Tile on the ACMER P2 33W. Always run a test on scrap material first.
These 1 setting cover engrave Ceramic Tile on the ACMER P2 33W (33W diode laser). Stone engraving is forgiving — the laser ablates the surface without deep penetration, so focus accuracy and DPI matter more than power.
1 setting
Frequently asked questions
What speed should I use to engrave Ceramic Tile on the ACMER P2 33W?
The top-rated community setting uses 2500 mm/min at 90% power. Apply white paint or Cermark, let dry, laser, wipe off.
Can the ACMER P2 33W cut Ceramic Tile?
Cutting Ceramic Tile on the ACMER P2 33W may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the ACMER P2 33W need to engrave Ceramic Tile?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Ceramic Tile on the ACMER P2 33W?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Ceramic Tile on the ACMER P2 33W?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with Ceramic Tile
Templates ready to cut on your ACMER P2 33W once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris