Atomstack A20 Pro — 2mm Basswood Plywood
1 community-tested setting for cut 2mm Basswood Plywood on the Atomstack A20 Pro. Always run a test on scrap material first.
Where to buy
Buy the Atomstack A20 Pro — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 1 setting cover cut 2mm Basswood Plywood on the Atomstack A20 Pro (20W diode laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece.
1 setting
Frequently asked questions
What speed should I use to cut 2mm Basswood Plywood on the Atomstack A20 Pro?
The top-rated community setting uses 3000 mm/min at 100% power. 2mm basswood cuts in a single pass on most diode lasers. Air assist keeps the cut clean and reduces char.
How many passes does the Atomstack A20 Pro need to cut 2mm Basswood Plywood?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for 2mm Basswood Plywood on the Atomstack A20 Pro?
Yes — 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the Atomstack A20 Pro for 2mm Basswood Plywood?
The Atomstack A20 Pro works with LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with 2mm Basswood Plywood
Templates ready to cut on your Atomstack A20 Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris