Atomstack A20 Pro — Cork
1 community-tested setting for cut Cork on the Atomstack A20 Pro. Always run a test on scrap material first.
Where to buy
Buy the Atomstack A20 Pro — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 1 setting cover cut Cork on the Atomstack A20 Pro (20W diode laser). Always test on scrap before committing to your final piece — material batches can vary in density and composition.
1 setting
Frequently asked questions
What speed should I use to cut Cork on the Atomstack A20 Pro?
The top-rated community setting uses 2500 mm/min at 60% power. Cork cuts cleanly. No air assist to prevent movement.
How many passes does the Atomstack A20 Pro need to cut Cork?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Cork on the Atomstack A20 Pro?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What software do I use with the Atomstack A20 Pro for Cork?
The Atomstack A20 Pro works with LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Cork
Templates ready to cut on your Atomstack A20 Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris