Atomstack A5 Pro — Bamboo
3 community-tested settings for engrave, cut Bamboo on the Atomstack A5 Pro. Always run a test on scrap material first.
Where to buy
Buy the Atomstack A5 Pro — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 3 settings cover engrave and cut Bamboo on the Atomstack A5 Pro (10W diode laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece. Some settings use multiple passes for a cleaner cut — pin or tape your material flat before running to prevent shift between passes.
3 settings
Frequently asked questions
What speed should I use to engrave Bamboo on the Atomstack A5 Pro?
The top-rated community setting uses 4000 mm/min at 45% power. Even engrave on bamboo. Dark contrast, minimal smoke.
How many passes does the Atomstack A5 Pro need to cut Bamboo?
Settings here range from 1 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Bamboo on the Atomstack A5 Pro?
Yes — 1 of the 3 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Bamboo
Templates ready to cut on your Atomstack A5 Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris