Bamboo

Fine detail bamboo engrave for photo or intricate designs. Slower at same power gives deeper, darker marks.

Bamboo CO2 engrave — denser than basswood, needs slightly more power or fewer speed. Good for cutting boards and utensils.

Fine detail bamboo engrave for photo or intricate designs. Slower at same power gives deeper, darker marks.

Bamboo CO2 engrave — denser than basswood, needs slightly more power or fewer speed. Good for cutting boards and utensils.

Fine detail bamboo engrave for photo or intricate designs. Slower at same power gives deeper, darker marks.

Bamboo CO2 engrave — denser than basswood, needs slightly more power or fewer speed. Good for cutting boards and utensils.

Fine detail bamboo engrave for photo or intricate designs. Slower at same power gives deeper, darker marks.

Bamboo CO2 engrave — denser than basswood, needs slightly more power or fewer speed. Good for cutting boards and utensils.

Fine detail bamboo engrave for photo or intricate designs. Slower at same power gives deeper, darker marks.

Bamboo CO2 engrave — denser than basswood, needs slightly more power or fewer speed. Good for cutting boards and utensils.

Bamboo engraves with great contrast at 80W. Air assist on at low flow.

20W UV is fast on bamboo. Sharp mark, minimal smoke.

UV gives clean dark mark on bamboo with minimal smoke.

Fast clean engrave on bamboo sheets.

Dark contrast on bamboo. Good for kitchen accessories.

Even engrave on bamboo. Dark contrast, minimal smoke.

Bamboo is dense — 5 passes at full power on 5W Falcon.

Bamboo dense — 3 passes at full power on 10W M1.

Bamboo one pass on 80W at 65%. Dense material benefits from higher power.

Bamboo 2 passes at 82% on galvo CO2. Dense material needs higher power.

Bamboo needs 2 passes at 90% on 22W.

Bamboo is dense — 2 passes at 85% on K40.

Bamboo cuts in one pass at full power on the Plus.

Bamboo needs 2 passes at 90% on 20W diode.

10W S9 needs 3 passes for bamboo. Dense material — patience required.

Bamboo slightly denser — reduce speed vs basswood.

Bamboo is denser than basswood — slightly slower. Test on your specific thickness.

Bamboo is dense — slightly lower speed than basswood. Air assist prevents flare-ups.

Bamboo requires higher power on the S20 Pro. 68% at 2500mm/min gives good contrast on bamboo cutting boards and coasters. The S20 Pro has built-in air assist — keep it off for engraving to avoid blowing dust onto the engrave.

Bamboo requires higher power on the Falcon2 due to its hardness. 70% at 2500mm/min gives acceptable contrast. Consistent results on flat bamboo stock. Popular in the Creality community for cutting board personalization.

Bamboo engraves well on the Boss LS-1630. 35% at 500mm/min handles the harder silica-rich grain. Production-ready throughput for bamboo cutting boards, coasters, and utensils. The large 16"×30" bed fits multiple items per run.

Bamboo engraves beautifully on the Glowforge Pro. 500 Glowforge units / 60% power. Dense material but the 45W handles it well. Very popular in the Glowforge community for personalized cutting boards and coasters.

Bamboo takes more power than wood at 20W due to silica content. 68% at 2800mm/min gives solid contrast. Line interval 0.1mm. Popular for cutting boards and coasters on the LM3 community.

Bamboo engraves well on the S30 Pro. Harder than wood so slightly more power needed. 55% at 3500mm/min gives good contrast. Very popular material for the Sculpfun community — cutting boards, coasters, and utensils. Line interval 0.1mm recommended.

Bamboo cuts in 2 passes at full power on the S1. Harder than wood plywood — expect slightly more char on edges. Air assist is important. Bamboo sheets cut more predictably than solid bamboo stock. Consistent results.

Bamboo is a popular S1 material — harder than wood but the 40W module handles it well. 48% at 4000mm/min gives good contrast. The S1's enclosed workspace helps contain bamboo dust. Bamboo cutting boards, coasters, and utensils are ideal projects.

Bamboo is harder than most woods due to silica content — needs 2 full-power passes. Air assist required. Bamboo sheets cut better than whole bamboo boards. Expect slight charring on edges. The hardness makes it durable but trickier to cut than softwood plywood.

Bamboo engraves with excellent contrast on CO2. The silica content makes it harder than most woods but CO2 handles it well. Keep air assist off for cleaner engrave marks. Bamboo cutting boards are a particularly popular item. Test on the flat face vs edge grain.

Very thin veneer needs very low power. Easy to burn through. High speed, low power. Beautiful result on cards and box lids.

What are the best laser settings for Bamboo?

A top-rated community setting for Bamboo on the Glowforge Pro is speed 300 mm/s, power 30%. There are 104 community-tested settings for Bamboo across 52 machines on this page.

Can a diode laser engrave or cut Bamboo?

Yes — there are 56 community settings for Bamboo on diode lasers and 46 on CO₂ lasers. CO₂ lasers generally cut faster and cleaner, but modern high-wattage diode lasers handle most wood work well.

Do I need air assist for Bamboo?

48% of the community settings for Bamboo use air assist. Air assist is optional for most operations but can improve edge quality on cuts.