Atomstack S20 Pro: Leather
1 community-tested setting for cut Leather on the Atomstack S20 Pro. Always run a test on scrap material first.
Where to buy
Atomstack S20 Pro: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover cut Leather on the Atomstack S20 Pro (20W diode laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching. Some settings use multiple passes for a cleaner cut: pin or tape your material flat before running to prevent shift between passes.
1 setting
Frequently asked questions
What speed should I use to cut Leather on the Atomstack S20 Pro?
The top-rated community setting uses 1500 mm/min at 100% power, 2 passes. 20W Atomstack cuts leather in 2 passes at full power.
How many passes does the Atomstack S20 Pro need to cut Leather?
Settings here range from 2 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for Leather on the Atomstack S20 Pro?
Yes: 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Leather
Templates ready to cut on your Atomstack S20 Pro once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris