Bambu Lab Laser Module 40W: Genuine Leather
2 community-tested settings for engrave, cut Genuine Leather on the Bambu Lab Laser Module 40W. Always run a test on scrap material first.
Where to buy
Bambu Lab Laser Module 40W: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut Genuine Leather on the Bambu Lab Laser Module 40W (40W diode laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching.
2 settings
Frequently asked questions
What speed should I use to engrave Genuine Leather on the Bambu Lab Laser Module 40W?
The top-rated community setting uses 2000 mm/min at 30% power. Conservative starting point derived from the 20W-class diode baseline.
How many passes does the Bambu Lab Laser Module 40W need to cut Genuine Leather?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Genuine Leather on the Bambu Lab Laser Module 40W?
Yes: 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the Bambu Lab Laser Module 40W for Genuine Leather?
The Bambu Lab Laser Module 40W works with Bambu Studio. Enter the speed, power, and passes directly into your software's layer settings: no conversion needed.
Now make something with Genuine Leather
Templates ready to cut on your Bambu Lab Laser Module 40W once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris