Bambu Laser — Genuine Leather
3 community-tested settings for engrave, cut Genuine Leather on the Bambu Laser. Always run a test on scrap material first.
These 3 settings cover engrave and cut Genuine Leather on the Bambu Laser (10W diode laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching. Some settings use multiple passes for a cleaner cut — pin or tape your material flat before running to prevent shift between passes.
3 settings
Frequently asked questions
What speed should I use to engrave Genuine Leather on the Bambu Laser?
The top-rated community setting uses 2800 mm/min at 38% power. Deep dark mark on veg-tan leather.
How many passes does the Bambu Laser need to cut Genuine Leather?
Settings here range from 1 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Genuine Leather on the Bambu Laser?
Yes — 1 of the 3 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What DPI should I use to engrave Genuine Leather on the Bambu Laser?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with Genuine Leather
Templates ready to cut on your Bambu Laser once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris