ComMarker B4 — Titanium
2 community-tested settings for mark Titanium on the ComMarker B4. Always run a test on scrap material first.
Where to buy
Buy the ComMarker B4 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover mark Titanium on the ComMarker B4 (20W fiber laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
2 settings
Frequently asked questions
What speed should I use to mark Titanium on the ComMarker B4?
The top-rated community setting uses 800 mm/s at 50% power. Blue-gold interference color. Speed and power affect hue.
How many passes does the ComMarker B4 need to engrave Titanium?
Settings here range from 1 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Titanium on the ComMarker B4?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What software do I use with the ComMarker B4 for Titanium?
The ComMarker B4 works with EzCad2 and LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Titanium
Templates ready to cut on your ComMarker B4 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris