ComMarker B6 20W UV — Cardstock 300gsm
1 community-tested setting for cut Cardstock 300gsm on the ComMarker B6 20W UV. Always run a test on scrap material first.
These 1 setting cover cut Cardstock 300gsm on the ComMarker B6 20W UV (20W UV laser). Keep speeds high and power low to avoid burning through; masking tape on the surface reduces scorching around cut edges.
1 setting
Frequently asked questions
What speed should I use to cut Cardstock 300gsm on the ComMarker B6 20W UV?
The top-rated community setting uses 400 mm/s at 50% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the ComMarker B6 20W UV need to cut Cardstock 300gsm?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Cardstock 300gsm on the ComMarker B6 20W UV?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Cardstock 300gsm
Templates ready to cut on your ComMarker B6 20W UV once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris