ComMarker B6 20W UV — Genuine Leather
1 community-tested setting for engrave Genuine Leather on the ComMarker B6 20W UV. Always run a test on scrap material first.
These 1 setting cover engrave Genuine Leather on the ComMarker B6 20W UV (20W UV laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching.
1 setting
Frequently asked questions
What speed should I use to engrave Genuine Leather on the ComMarker B6 20W UV?
The top-rated community setting uses 700 mm/s at 28% power. UV marks leather without burning smell. Very fine detail possible.
Can the ComMarker B6 20W UV cut Genuine Leather?
Cutting Genuine Leather on the ComMarker B6 20W UV may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the ComMarker B6 20W UV need to engrave Genuine Leather?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Genuine Leather on the ComMarker B6 20W UV?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Genuine Leather on the ComMarker B6 20W UV?
Settings here use 500 DPI. Higher DPI gives finer detail but significantly increases burn time — 300 DPI is a good balance for most projects.
Now make something with Genuine Leather
Templates ready to cut on your ComMarker B6 20W UV once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris