FLUX Ador: Delrin / Acetal
2 community-tested settings for cut, engrave Delrin / Acetal on the FLUX Ador. Always run a test on scrap material first.
Where to buy
FLUX Ador: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Delrin / Acetal on the FLUX Ador (50W CO₂ laser).
2 settings
Frequently asked questions
What speed should I use to cut Delrin / Acetal on the FLUX Ador?
The top-rated community setting uses 15 mm/s at 72% power. Cuts cleanly with a smooth edge. Use fume extraction; Delrin releases formaldehyde gas when lased.
How many passes does the FLUX Ador need to cut Delrin / Acetal?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Delrin / Acetal on the FLUX Ador?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Delrin / Acetal
Templates ready to cut on your FLUX Ador once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris