FLUX Ador — Faux Leather
2 community-tested settings for engrave, cut Faux Leather on the FLUX Ador. Always run a test on scrap material first.
These 2 settings cover engrave and cut Faux Leather on the FLUX Ador (50W CO₂ laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching.
2 settings
Frequently asked questions
What speed should I use to engrave Faux Leather on the FLUX Ador?
The top-rated community setting uses 500 mm/s at 12% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the FLUX Ador need to cut Faux Leather?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Faux Leather on the FLUX Ador?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Faux Leather on the FLUX Ador?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with Faux Leather
Templates ready to cut on your FLUX Ador once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris