FLUX Ador: Polycarbonate (Lexan)
1 community-tested setting for engrave Polycarbonate (Lexan) on the FLUX Ador. Always run a test on scrap material first.
Where to buy
FLUX Ador: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover engrave Polycarbonate (Lexan) on the FLUX Ador (50W CO₂ laser).
1 setting
Frequently asked questions
What speed should I use to engrave Polycarbonate (Lexan) on the FLUX Ador?
The top-rated community setting uses 290 mm/s at 15% power. Engrave only -- polycarbonate scorches, yellows, and can craze/crack if you try to cut it with a CO2 or diode laser. Low power, high speed, single pass.
Can the FLUX Ador cut Polycarbonate (Lexan)?
Cutting Polycarbonate (Lexan) on the FLUX Ador may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the FLUX Ador need to engrave Polycarbonate (Lexan)?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Polycarbonate (Lexan) on the FLUX Ador?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Polycarbonate (Lexan)
Templates ready to cut on your FLUX Ador once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris