FLUX Ador
co2 laser50W600×375mm
Top 10 community settings — bonnycreations.com
| Material | Op | Speed · Power · Passes |
|---|---|---|
| Cardstock | cut | 50 mm/s · 22% |
| Coated Stainless Steel Tumbler | engrave | 330 mm/min · 46% |
| 3mm Clear Acrylic | cut | 15 mm/s · 65% |
| 3mm Baltic Birch Plywood | cut | 24 mm/s · 60% · air |
| Genuine Leather | engrave | 300 mm/min · 42% |
| 3mm MDF | cut | 24 mm/s · 60% · air |
| 3mm Basswood Plywood | cut | 24 mm/s · 60% · air |
| Cardboard | cut | 40 mm/s · 42% |
| Bamboo | engrave | 350 mm/min · 50% |
| Cork | cut | 28 mm/s · 50% |
Community-contributed settings. Results vary by material batch and machine calibration — always test on scrap first.
Full settings library at bonnycreations.com/settings/machines/flux-ador
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris