Flux Beamo — Genuine Leather
2 community-tested settings for cut, engrave Genuine Leather on the Flux Beamo. Always run a test on scrap material first.
These 2 settings cover cut and engrave Genuine Leather on the Flux Beamo (30W CO₂ laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching.
2 settings
Frequently asked questions
What speed should I use to cut Genuine Leather on the Flux Beamo?
The top-rated community setting uses 22 mm/s at 65% power. Cuts through 2mm veg-tan leather cleanly. The Beamo's small bed limits you to smaller leather pieces — earrings, keychains, and patches rather than full bags. The enclosed design makes leather cutting more pleasant than open-frame machines.
How many passes does the Flux Beamo need to cut Genuine Leather?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Genuine Leather on the Flux Beamo?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Genuine Leather on the Flux Beamo?
Settings here use 250 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with Genuine Leather
Templates ready to cut on your Flux Beamo once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris