Glowforge Plus: Bamboo
1 community-tested setting for cut Bamboo on the Glowforge Plus. Always run a test on scrap material first.
Where to buy
Glowforge Plus: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover cut Bamboo on the Glowforge Plus (45W CO₂ laser). Wood results vary by grain direction and moisture content: always run a quick test on scrap before cutting your final piece.
1 setting
Frequently asked questions
What speed should I use to cut Bamboo on the Glowforge Plus?
The top-rated community setting uses 130 mm/min at 100% power. Bamboo cuts in one pass at full power on the Plus.
How many passes does the Glowforge Plus need to cut Bamboo?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Bamboo on the Glowforge Plus?
Yes: 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Bamboo
Templates ready to cut on your Glowforge Plus once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris