Glowforge Pro — Craft Felt 3mm
3 community-tested settings for cut, engrave Craft Felt 3mm on the Glowforge Pro. Always run a test on scrap material first.
Where to buy
Buy the Glowforge Pro — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 3 settings cover cut and engrave Craft Felt 3mm on the Glowforge Pro (45W CO₂ laser). Always test on scrap before committing to your final piece — material batches can vary in density and composition.
3 settings
Frequently asked questions
What speed should I use to cut Craft Felt 3mm on the Glowforge Pro?
The top-rated community setting uses 50 mm/s at 15% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the Glowforge Pro need to cut Craft Felt 3mm?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Craft Felt 3mm on the Glowforge Pro?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Craft Felt 3mm on the Glowforge Pro?
Settings here use 254 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
What software do I use with the Glowforge Pro for Craft Felt 3mm?
The Glowforge Pro works with Glowforge App. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Craft Felt 3mm
Templates ready to cut on your Glowforge Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris