Craft Felt 3mm

Acrylic felt cuts cleanly; wool felt may need 2 passes. Sealed edges are a feature.

Felt cuts in one pass on the D1 Pro. 80% at 700mm/min. Turn off air assist. Wool felt cuts cleaner than synthetic. Popular for holiday ornaments and laser-cut craft projects in the xTool community.

Felt cuts in one pass on the S20 Pro at 80%. Turn off built-in air assist to prevent material blowing. Wool felt cuts cleaner than acrylic.

Felt cuts cleanly on the Falcon2 in one pass. No air assist. Wool felt gives cleaner edges than synthetic. Good for ornaments and craft projects.

Felt cuts cleanly on the Boss. 22% at 1000mm/min. CO2 gives cleaner edges on felt than diode. Wool felt preferred. No air assist. Large format enables high-volume ornament and craft production runs.

Felt cuts cleanly on the Glowforge Pro. About 1200 Glowforge units / 28% power. CO2 gives cleaner edges on felt than diode. Wool felt cuts especially cleanly. Very popular in the Glowforge community for holiday ornaments and seasonal decorations.

Felt cuts in one pass at 80% on the LM3. No air assist. Wool felt gives cleaner edges. Good for ornaments and festive laser-cut projects.

Felt cuts cleanly on the 33W S30 Pro. No air assist to prevent material blowing. Wool felt gives cleaner edges than synthetic. Good for ornaments, applique, and laser-cut embellishments.

Felt cuts cleanly on the S1 at moderate speed and power. Synthetic felt melts at edges slightly — wool felt gives cleaner results. No air assist to prevent blowing the material. Good for ornaments, patches, and embellishments.

Surface texture engrave on felt. Reduces pile for a velvet contrast effect.

Clean sealed edges — no fraying. CO2 is ideal for felt. Keep air assist off to avoid blowing material.

What are the best laser settings for Craft Felt 3mm?

A top-rated community setting for Craft Felt 3mm on the ComMarker B6 20W UV is speed 80 mm/s, power 90%. There are 30 community-tested settings for Craft Felt 3mm across 14 machines on this page.

Can a diode laser engrave or cut Craft Felt 3mm?

Yes - there are 19 community settings for Craft Felt 3mm on diode lasers and 9 on CO₂ lasers. CO₂ lasers generally cut faster and cleaner, but modern high-wattage diode lasers handle most other work well.

Do I need air assist for Craft Felt 3mm?

20% of the community settings for Craft Felt 3mm use air assist. Air assist is optional for most operations but can improve edge quality on cuts.