JPT MOPA 30W Fiber — Stainless Steel Business Card
1 community-tested setting for engrave Stainless Steel Business Card on the JPT MOPA 30W Fiber. Always run a test on scrap material first.
These 1 setting cover engrave Stainless Steel Business Card on the JPT MOPA 30W Fiber (30W fiber laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
1 setting
Frequently asked questions
What speed should I use to engrave Stainless Steel Business Card on the JPT MOPA 30W Fiber?
The top-rated community setting uses 1000 mm/s at 55% power. Ultra-sharp lines. MOPA allows <0.1mm feature size.
Can the JPT MOPA 30W Fiber cut Stainless Steel Business Card?
A 30W fiber laser can mark or engrave metal surfaces but cannot cut through them — metal cutting requires a much higher-powered laser or a plasma cutter.
How many passes does the JPT MOPA 30W Fiber need to engrave Stainless Steel Business Card?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Stainless Steel Business Card on the JPT MOPA 30W Fiber?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Stainless Steel Business Card
Templates ready to cut on your JPT MOPA 30W Fiber once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris