Stainless Steel Business Card

7 settings6 machines

This page lists 7 community-tested settings for Stainless Steel Business Card. Most metals require a coating (Cermark, Brilliance Laser Ink, or anodizing) for diode lasers. CO2 lasers can mark bare metal with the right settings.

metal

+ Submit a setting for this material

Top setting per machine

Machine	Op	Speed	Power	Passes
LaserPecker 4	engrave	1500 mm/s	90%	1
xTool F1 Ultra (Fiber)	engrave	1500 mm/s	90%	1
JPT MOPA 30W Fiber	engrave	1000 mm/s	55%	1
Commarker B6 30W	engrave	1100 mm/s	55%	1
ComMarker B4	engrave	900 mm/s	60%	1
xTool F1✓	engrave	900 mm/min	90%	2

Works with these machines

LaserPecker 4 xTool F1 Ultra (Fiber)JPT MOPA 30W Fiber Commarker B6 30W ComMarker B4 xTool F1

7 settings

LaserPecker 42Wfiber

engrave

Speed1500 mm/sPower90%Passes1

★★★★★

Sharp marks at near-max. 0.05mm hatch.

Shop LaserPecker 4 →More settings for this machine →

xTool F1 Ultra (Fiber)2Wfiber

engrave

Speed1500 mm/sPower90%Passes1

★★★★★

Near-max power for steel cards. 0.05mm fill spacing for solid fill.

Shop xTool F1 Ultra (Fiber) →More settings for this machine →

JPT MOPA 30W Fiber30Wfiber

engrave

Speed1000 mm/sPower55%Passes1

★★★★★

Ultra-sharp lines. MOPA allows <0.1mm feature size.

More settings for this machine →

Commarker B6 30W30Wfiber

engrave

Speed1100 mm/sPower55%Passes1

★★★★★

Production-speed marking. 0.05mm hatch spacing.

Shop Commarker B6 30W →More settings for this machine →

ComMarker B420Wfiber

engrave

Speed900 mm/sPower60%Passes1

★★★★★

High-contrast mark. Fill hatching at 0.05mm line spacing.

Shop ComMarker B4 →More settings for this machine →

xTool F12Wfiber

engrave✓ Verified

Speed900 mm/minPower90%Passes2DPI500

★★★★★

High-detail engraving on stainless business cards for a premium tactile finish. 2 passes at 500 DPI produces a clearly recessed mark. Slower than marking but gives a noticeably deeper result. Good for logos, names, and QR codes.

Shop xTool F1 →More settings for this machine →

xTool F12Wfiber

mark✓ Verified

Speed1800 mm/minPower80%Passes1DPI300

★★★★★

0.3–0.5mm stainless business cards. Deep black oxidation mark — permanent and corrosion resistant. Single pass is sufficient. Clamp or tape card flat — any flex affects focus and mark quality. Works equally well on brushed and mirror-polished finish.

Shop xTool F1 →More settings for this machine →

Materials

Supplies to have on hand

Materials and accessories that pair well with Stainless Steel Business Card laser projects.

Cermark Metal Marking SprayAllows CO₂ and diode lasers to permanently mark bare metal.

Buy on Amazon →

Brilliance Laser InkBudget alternative to Cermark for metal marking.

Buy on Amazon →

Anodized Aluminum SheetEngraves vivid black on a diode laser - no spray needed.

Buy on Amazon →

Amazon links are affiliate links. We earn a small commission at no extra cost to you.

Frequently Asked Questions

What are the best laser settings for Stainless Steel Business Card?

A top-rated community setting for Stainless Steel Business Card on the LaserPecker 4 is speed 1500 mm/s, power 90%. There are 7 community-tested settings for Stainless Steel Business Card across 6 machines on this page.

Do I need a fiber laser for Stainless Steel Business Card?

Fiber lasers can mark Stainless Steel Business Card directly without any coating. There are 7 fiber laser settings on this page. Diode and CO₂ lasers may require a marking compound (like Cermark) to achieve a visible result on bare metal.

What Makers Say

★★★★★5.0· 6 reviews

View all on Etsy →

★★★★★

"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."

— Anna

★★★★★

"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."

— Camp

★★★★★

"Excellent quality and design. Cut clean and neat!"

— LYNN

★★★★★

"Great jigs. Appreciate the time saved not having to build this from scratch!"

— Bruce

★★★★★

"Excellent quality. Item as described. Expectations exceeded."

— Michael

★★★★★

"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."

— chris

Leave a review →