LaserPecker 4 — Bare Aluminum
2 community-tested settings for engrave, mark Bare Aluminum on the LaserPecker 4. Always run a test on scrap material first.
Where to buy
Buy the LaserPecker 4 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and mark Bare Aluminum on the LaserPecker 4 (2W fiber laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
2 settings
Frequently asked questions
What speed should I use to engrave Bare Aluminum on the LaserPecker 4?
The top-rated community setting uses 2800 mm/s at 76% power. White mark on raw aluminum. Galvo speed compensates.
How many passes does the LaserPecker 4 need to engrave Bare Aluminum?
Settings here range from 1 to 3 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Bare Aluminum on the LaserPecker 4?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What software do I use with the LaserPecker 4 for Bare Aluminum?
The LaserPecker 4 works with LaserPecker. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Bare Aluminum
Templates ready to cut on your LaserPecker 4 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris