LaserPecker 4 — Nickel Plated Steel
1 community-tested setting for mark Nickel Plated Steel on the LaserPecker 4. Always run a test on scrap material first.
Where to buy
Buy the LaserPecker 4 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 1 setting cover mark Nickel Plated Steel on the LaserPecker 4 (2W fiber laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
1 setting
Frequently asked questions
What speed should I use to mark Nickel Plated Steel on the LaserPecker 4?
The top-rated community setting uses 2000 mm/s at 80% power. Clean dark mark on nickel.
How many passes does the LaserPecker 4 need to engrave Nickel Plated Steel?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Nickel Plated Steel on the LaserPecker 4?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What software do I use with the LaserPecker 4 for Nickel Plated Steel?
The LaserPecker 4 works with LaserPecker. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Nickel Plated Steel
Templates ready to cut on your LaserPecker 4 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris