LaserPecker LP2: Genuine Leather

What speed should I use to engrave Genuine Leather on the LaserPecker LP2?

The top-rated community setting uses 1800 mm/min at 50% power. LaserPecker LP2 is a compact handheld engraver — best suited to surface marking rather than cutting. Rich dark mark on veg-tan leather. Keep power at 50% max — thin diode beam can cut through thin leather. 5W-class diode baseline — consistent with other 5W/6W diode machines in the settings database (Longer Ray5, Creality Falcon 5W, Atomstack A5 Pro). Always test on scrap first; individual units vary.

Can the LaserPecker LP2 cut Genuine Leather?

Cutting Genuine Leather on the LaserPecker LP2 may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.

How many passes does the LaserPecker LP2 need to engrave Genuine Leather?

All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.

Do I need air assist for Genuine Leather on the LaserPecker LP2?

Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.