Longer B1: Bamboo
1 community-tested setting for cut Bamboo on the Longer B1. Always run a test on scrap material first.
Where to buy
Longer B1: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover cut Bamboo on the Longer B1 (22W diode laser). Wood results vary by grain direction and moisture content: always run a quick test on scrap before cutting your final piece. Some settings use multiple passes for a cleaner cut: pin or tape your material flat before running to prevent shift between passes.
1 setting
Frequently asked questions
What speed should I use to cut Bamboo on the Longer B1?
The top-rated community setting uses 2000 mm/min at 90% power, 2 passes. Bamboo needs 2 passes at 90% on 22W.
How many passes does the Longer B1 need to cut Bamboo?
Settings here range from 2 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for Bamboo on the Longer B1?
Yes: 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Bamboo
Templates ready to cut on your Longer B1 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris