Longer Ray5: Polypropylene (Coroplast)
2 community-tested settings for cut, engrave Polypropylene (Coroplast) on the Longer Ray5. Always run a test on scrap material first.
Where to buy
Longer Ray5: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Polypropylene (Coroplast) on the Longer Ray5 (5W diode laser). Some settings use multiple passes for a cleaner cut: pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to cut Polypropylene (Coroplast) on the Longer Ray5?
The top-rated community setting uses 550 mm/min at 62% power, 3 passes. Air assist strongly recommended to clear melted plastic and keep the flutes from re-fusing. Typical corrugated board is ~4mm.
How many passes does the Longer Ray5 need to cut Polypropylene (Coroplast)?
Settings here range from 1 to 3 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for Polypropylene (Coroplast) on the Longer Ray5?
Yes: 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the Longer Ray5 for Polypropylene (Coroplast)?
The Longer Ray5 works with LightBurn,LaserGRBL. Enter the speed, power, and passes directly into your software's layer settings: no conversion needed.
Now make something with Polypropylene (Coroplast)
Templates ready to cut on your Longer Ray5 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris