MECPOW X4 Pro: Genuine Leather
2 community-tested settings for engrave, cut Genuine Leather on the MECPOW X4 Pro. Always run a test on scrap material first.
Where to buy
MECPOW X4 Pro: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut Genuine Leather on the MECPOW X4 Pro (22W diode laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching. Some settings use multiple passes for a cleaner cut: pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to engrave Genuine Leather on the MECPOW X4 Pro?
The top-rated community setting uses 1500 mm/min at 35% power. Light touch gives a dark rich mark — no air assist needed. 20W-class diode baseline — consistent with other 20W diode machines in the settings database (Atomstack X20/A20/S20 Pro, Ortur Laser Master 2 Pro, xTool S1 20W). Always test on scrap first; individual units vary.
How many passes does the MECPOW X4 Pro need to cut Genuine Leather?
Settings here range from 1 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for Genuine Leather on the MECPOW X4 Pro?
Yes: 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the MECPOW X4 Pro for Genuine Leather?
The MECPOW X4 Pro works with LightBurn. Enter the speed, power, and passes directly into your software's layer settings: no conversion needed.
Now make something with Genuine Leather
Templates ready to cut on your MECPOW X4 Pro once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris