Monport GP 40W CO2 — Leather
1 community-tested setting for engrave Leather on the Monport GP 40W CO2. Always run a test on scrap material first.
These 1 setting cover engrave Leather on the Monport GP 40W CO2 (40W CO₂ laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching.
1 setting
Frequently asked questions
What speed should I use to engrave Leather on the Monport GP 40W CO2?
The top-rated community setting uses 450 mm/s at 22% power, 28 passes. 0
Can the Monport GP 40W CO2 cut Leather?
Cutting Leather on the Monport GP 40W CO2 may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the Monport GP 40W CO2 need to engrave Leather?
Settings here range from 28 to 28 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Leather on the Monport GP 40W CO2?
Yes — 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the Monport GP 40W CO2 for Leather?
The Monport GP 40W CO2 works with LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Leather
Templates ready to cut on your Monport GP 40W CO2 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris