NEJE 3 Max — Faux Leather
1 community-tested setting for cut Faux Leather on the NEJE 3 Max. Always run a test on scrap material first.
Where to buy
Buy the NEJE 3 Max — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 1 setting cover cut Faux Leather on the NEJE 3 Max (12W diode laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching. Some settings use multiple passes for a cleaner cut — pin or tape your material flat before running to prevent shift between passes.
1 setting
Frequently asked questions
What speed should I use to cut Faux Leather on the NEJE 3 Max?
The top-rated community setting uses 2000 mm/min at 100% power, 2 passes. Clean faux leather cuts. NEJE 3 Max large bed is great for leather sheets.
How many passes does the NEJE 3 Max need to cut Faux Leather?
Settings here range from 2 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Faux Leather on the NEJE 3 Max?
Yes — 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Faux Leather
Templates ready to cut on your NEJE 3 Max once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris