NEJE 3 Max — Rubber Stamp Material
1 community-tested setting for engrave Rubber Stamp Material on the NEJE 3 Max. Always run a test on scrap material first.
These 1 setting cover engrave Rubber Stamp Material on the NEJE 3 Max (12W diode laser). Always test on scrap before committing to your final piece — material batches can vary in density and composition.
1 setting
Frequently asked questions
What speed should I use to engrave Rubber Stamp Material on the NEJE 3 Max?
The top-rated community setting uses 1500 mm/min at 65% power. Invert design for good stamp relief.
Can the NEJE 3 Max cut Rubber Stamp Material?
Cutting Rubber Stamp Material on the NEJE 3 Max may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the NEJE 3 Max need to engrave Rubber Stamp Material?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Rubber Stamp Material on the NEJE 3 Max?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Rubber Stamp Material on the NEJE 3 Max?
Settings here use 500 DPI. Higher DPI gives finer detail but significantly increases burn time — 300 DPI is a good balance for most projects.
Now make something with Rubber Stamp Material
Templates ready to cut on your NEJE 3 Max once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris