NEJE Max 4 E80: Genuine Leather
2 community-tested settings for engrave, cut Genuine Leather on the NEJE Max 4 E80. Always run a test on scrap material first.
Where to buy
NEJE Max 4 E80: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut Genuine Leather on the NEJE Max 4 E80 (22W diode laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching. Some settings use multiple passes for a cleaner cut: pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to engrave Genuine Leather on the NEJE Max 4 E80?
The top-rated community setting uses 1500 mm/min at 35% power. Light touch gives a dark rich mark — no air assist needed. 20W-class diode baseline — consistent with other 20W diode machines in the settings database (Atomstack X20/A20/S20 Pro, Ortur Laser Master 2 Pro, xTool S1 20W). Always test on scrap first; individual units vary.
How many passes does the NEJE Max 4 E80 need to cut Genuine Leather?
Settings here range from 1 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for Genuine Leather on the NEJE Max 4 E80?
Yes: 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Genuine Leather
Templates ready to cut on your NEJE Max 4 E80 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris