OMTech Polar — 6mm Clear Acrylic
2 community-tested settings for engrave, cut 6mm Clear Acrylic on the OMTech Polar. Always run a test on scrap material first.
Where to buy
Buy the OMTech Polar — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut 6mm Clear Acrylic on the OMTech Polar (30W CO₂ laser). Cast acrylic engraves more cleanly than extruded; for cutting, a single clean pass at the right speed usually beats multiple passes. Some settings use multiple passes for a cleaner cut — pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to engrave 6mm Clear Acrylic on the OMTech Polar?
The top-rated community setting uses 80 mm/s at 28% power. CO2 wavelength is absorbed by clear acrylic — diode lasers pass straight through. Keep power low for engrave to avoid melt.
How many passes does the OMTech Polar need to cut 6mm Clear Acrylic?
Settings here range from 1 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for 6mm Clear Acrylic on the OMTech Polar?
Yes — 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What DPI should I use to engrave 6mm Clear Acrylic on the OMTech Polar?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with 6mm Clear Acrylic
Templates ready to cut on your OMTech Polar once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris