6mm Clear Acrylic
This page lists 12 community-tested settings for 6mm Clear Acrylic. Acrylic cuts and engraves cleanly on both CO2 and diode lasers. Cast acrylic gives a frosted edge on cuts; extruded acrylic melts and polishes.
Top setting per machine
Works with these machines
12 settings
Supplies to have on hand
Materials and accessories that pair well with 6mm Clear Acrylic laser projects.
Frequently Asked Questions
What are the best laser settings for 6mm Clear Acrylic?
A top-rated community setting for 6mm Clear Acrylic on the Glowforge Pro is speed 120 mm/s, power 22%. There are 12 community-tested settings for 6mm Clear Acrylic across 6 machines on this page.
Do I need air assist for 6mm Clear Acrylic?
50% of the community settings for 6mm Clear Acrylic use air assist. Air assist is strongly recommended - it reduces charring and improves cut quality.
What speed and power to cut 6mm Clear Acrylic in one pass?
Settings vary by machine wattage. For a 20W diode laser, cutting 6mm Clear Acrylic typically requires high power (90–100%) at moderate speed (1500–3000 mm/min) with air assist. CO₂ lasers can cut 6mm material faster - 20–60 mm/s at 50–70% power is common. Check the settings table below for your specific machine.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris