Sculpfun S30 Pro Max — Genuine Leather (Veg-Tan, ~3mm)
2 community-tested settings for cut, engrave Genuine Leather (Veg-Tan, ~3mm) on the Sculpfun S30 Pro Max. Always run a test on scrap material first.
Where to buy
Buy the Sculpfun S30 Pro Max — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Genuine Leather (Veg-Tan, ~3mm) on the Sculpfun S30 Pro Max (33W diode laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching.
2 settings
Frequently asked questions
What speed should I use to cut Genuine Leather (Veg-Tan, ~3mm) on the Sculpfun S30 Pro Max?
The top-rated community setting uses 4000 mm/min at 85% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the Sculpfun S30 Pro Max need to cut Genuine Leather (Veg-Tan, ~3mm)?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Genuine Leather (Veg-Tan, ~3mm) on the Sculpfun S30 Pro Max?
Yes — 2 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Genuine Leather (Veg-Tan, ~3mm)
Templates ready to cut on your Sculpfun S30 Pro Max once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris