Sculpfun S30 Pro Max Settings & Speeds

Where to buy

Buy the Sculpfun S30 Pro Max — check current price & availability

Engrave from the BACK side for a clean mirrored result.

Cast acrylic cuts cleaner than extruded.

Invert design for stamp relief.

Disable air assist.

Disable air assist.

Apply white paint or Cermark, let dry, laser, wipe off.

PU faux leather only.

Fast clean cut. Skip air assist on cardboard — can cause flare-ups. Large bed is good for packaging prototypes.

Cork chars easily — keep power low. Good for coasters and placemats. Larger bed suits multi-piece runs.

Great contrast on bamboo. The 600×600mm bed handles large cutting boards without repositioning.

Dense hardwood in one pass at 33W. The large bed is great for walnut sign blanks and layered designs.

High contrast removal of anodize coating. Works on all anodize colours. 33W gives good throughput for batch production.

Bright white engrave on slate. Invert image. Same results as S30 Pro — settings are identical for the same module.

Excellent dark engrave on veg-tan. 40% power gives rich result without burning. Test on scrap for your specific hide.

6mm birch needs 3 passes at 33W. Glue layers absorb energy unevenly — check sheet flatness. Air assist critical.

33W handles 3mm MDF in one pass. Air assist on to manage fumes and char. Large bed suits MDF sign blanks.

Fast fill engrave. Same module as S30 Pro — settings transfer directly. Larger bed lets you engrave bigger panels in one go.

Same 33W module as the S30 Pro — single pass clean cut. The Pro Max has a larger 600×600mm work area, ideal for bigger projects. Air assist on.

20W Sculpfun cuts 3mm basswood cleanly in one pass. Much faster than the 10W version. Clean smooth edges.

What materials can the Sculpfun S30 Pro Max engrave or cut?

The Sculpfun S30 Pro Max has community-tested settings for 3mm Mirrored Acrylic, 3mm Clear Acrylic (Cast), 3mm Maple Plywood, Rubber Stamp Material, Bamboo 3mm, Cotton Fabric, Denim Fabric, Chipboard 2mm, and 27 more. Results vary by material batch, focus, and ambient conditions — always test on scrap first.

What is the work area of the Sculpfun S30 Pro Max?

The Sculpfun S30 Pro Max has a work area of 370×360 mm (approximately 15×14 inches).

What settings should I use to cut Bamboo 3mm on the Sculpfun S30 Pro Max?

A community-tested starting point is speed 2500 mm/min, power 75% in a single pass. Always run a test cut on scrap to confirm before committing to your project.

Can the Sculpfun S30 Pro Max engrave metal?

Diode lasers can mark anodized aluminium, coated metals, and powder-coated surfaces without any spray. For bare steel, brass, or copper you need a marking compound like Cermark or Dry Moly. Fiber lasers mark bare metal directly without any coating.