Sculpfun S6 Pro — Kraft Paper
2 community-tested settings for engrave, cut Kraft Paper on the Sculpfun S6 Pro. Always run a test on scrap material first.
Where to buy
Buy the Sculpfun S6 Pro — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut Kraft Paper on the Sculpfun S6 Pro (6W diode laser). Keep speeds high and power low to avoid burning through; masking tape on the surface reduces scorching around cut edges.
2 settings
Frequently asked questions
What speed should I use to engrave Kraft Paper on the Sculpfun S6 Pro?
The top-rated community setting uses 5500 mm/min at 15% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the Sculpfun S6 Pro need to cut Kraft Paper?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Kraft Paper on the Sculpfun S6 Pro?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Kraft Paper on the Sculpfun S6 Pro?
Settings here use 254 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with Kraft Paper
Templates ready to cut on your Sculpfun S6 Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris