Sculpfun S9 — Slate (coaster)
3 community-tested settings for engrave Slate (coaster) on the Sculpfun S9. Always run a test on scrap material first.
Where to buy
Buy the Sculpfun S9 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 3 settings cover engrave Slate (coaster) on the Sculpfun S9 (10W diode laser). Stone engraving is forgiving — the laser ablates the surface without deep penetration, so focus accuracy and DPI matter more than power.
3 settings
Frequently asked questions
What speed should I use to engrave Slate (coaster) on the Sculpfun S9?
The top-rated community setting uses 1500 mm/min at 85% power. Higher DPI for fine detail and photo work on slate coasters.
Can the Sculpfun S9 cut Slate (coaster)?
Cutting Slate (coaster) on the Sculpfun S9 may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the Sculpfun S9 need to engrave Slate (coaster)?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Slate (coaster) on the Sculpfun S9?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Slate (coaster) on the Sculpfun S9?
Settings here use 254–400 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
What software do I use with the Sculpfun S9 for Slate (coaster)?
The Sculpfun S9 works with LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Slate (coaster)
Templates ready to cut on your Sculpfun S9 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris