Snapmaker Ray 20W — 3mm Walnut Plywood
2 community-tested settings for engrave, cut 3mm Walnut Plywood on the Snapmaker Ray 20W. Always run a test on scrap material first.
These 2 settings cover engrave and cut 3mm Walnut Plywood on the Snapmaker Ray 20W (20W diode laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece.
2 settings
Frequently asked questions
What speed should I use to engrave 3mm Walnut Plywood on the Snapmaker Ray 20W?
The top-rated community setting uses 3000 mm/min at 35% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the Snapmaker Ray 20W need to cut 3mm Walnut Plywood?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for 3mm Walnut Plywood on the Snapmaker Ray 20W?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave 3mm Walnut Plywood on the Snapmaker Ray 20W?
Settings here use 254 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with 3mm Walnut Plywood
Templates ready to cut on your Snapmaker Ray 20W once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris