Trotec Speedy 300 — Coated Stainless Steel Tumbler
1 community-tested setting for engrave Coated Stainless Steel Tumbler on the Trotec Speedy 300. Always run a test on scrap material first.
These 1 setting cover engrave Coated Stainless Steel Tumbler on the Trotec Speedy 300 (60W CO₂ laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
1 setting
Frequently asked questions
What speed should I use to engrave Coated Stainless Steel Tumbler on the Trotec Speedy 300?
The top-rated community setting uses 370 mm/min at 42% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
Can the Trotec Speedy 300 cut Coated Stainless Steel Tumbler?
A 60W CO₂ laser can mark or engrave metal surfaces but cannot cut through them — metal cutting requires a much higher-powered laser or a plasma cutter.
How many passes does the Trotec Speedy 300 need to engrave Coated Stainless Steel Tumbler?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Coated Stainless Steel Tumbler on the Trotec Speedy 300?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Coated Stainless Steel Tumbler
Templates ready to cut on your Trotec Speedy 300 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris