Trotec Speedy 300 Settings & Speeds
Updated May 2026 · 64 tested settings · 38 materials
Free download
📧 Email me the Trotec Speedy 300 cheat sheet (PDF)
Printable one-pager with the most-used speed/power/passes. Plus 10% off your first order.
We'll only email about new settings + occasional new releases. Unsubscribe anytime.
The Trotec Speedy 300 is a 60W co2 laser engraver with a 726×432mm work area. This page lists 64 community-tested settings covering speed, power, passes, air assist, and DPI across a range of materials. Always run a test cut on scrap material first — results vary depending on your material batch, focus, and ambient conditions.
The Trotec Speedy 300 is a professional CO₂ laser used in sign shops, industrial prototyping, and advanced fab labs. Trotec machines are the reference standard for professional laser work — fast, consistent, and built for sustained daily production. The Speedy 300 runs Trotec's Job Control software with LightBurn connectivity available. Far beyond hobbyist pricing, but the settings on this page are useful for translating to Trotec parameters from community-shared machine data.
Similar machines
Materials covered
Don't see your material?
64 settings
From the Blog
Frequently Asked Questions
What materials can the Trotec Speedy 300 engrave or cut?
The Trotec Speedy 300 has community-tested settings for 3mm Mirrored Acrylic, 3mm Clear Acrylic (Cast), 3mm Maple Plywood, Stainless Steel, Marble Tile, Rubber Stamp Material, 6mm MDF, 6mm Baltic Birch Plywood, and 30 more. Results vary by material batch, focus, and ambient conditions — always test on scrap first.
What is the work area of the Trotec Speedy 300?
The Trotec Speedy 300 has a work area of 726×432 mm (approximately 29×17 inches).
What settings should I use to cut Rubber Stamp Material on the Trotec Speedy 300?
A community-tested starting point is speed 11 mm/s, power 85% in a single pass. Always run a test cut on scrap to confirm before committing to your project.
What can a CO₂ laser like the Trotec Speedy 300 cut that a diode laser cannot?
CO₂ lasers can cut and engrave clear acrylic, glass (with care), fabric, and thicker wood more cleanly than diode lasers, because the CO₂ wavelength is absorbed by materials that are transparent to diode light. This makes the Trotec Speedy 300 more versatile for craft and production use.
Compare with similar machines
Same laser type · similar wattage
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris