xTool P2: 3mm MDF
1 community-tested setting for cut 3mm MDF on the xTool P2. Always run a test on scrap material first.
Where to buy
xTool P2: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover cut 3mm MDF on the xTool P2 (55W CO₂ laser). Wood results vary by grain direction and moisture content: always run a quick test on scrap before cutting your final piece.
1 setting
Frequently asked questions
What speed should I use to cut 3mm MDF on the xTool P2?
The top-rated community setting uses 40 mm/s at 55% power. 55W P2 cuts 3mm MDF easily. Single pass at moderate power.
How many passes does the xTool P2 need to cut 3mm MDF?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for 3mm MDF on the xTool P2?
Yes: 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the xTool P2 for 3mm MDF?
The xTool P2 works with xTool Studio and xTool Creative Space. Enter the speed, power, and passes directly into your software's layer settings: no conversion needed.
Now make something with 3mm MDF
Templates ready to cut on your xTool P2 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris