xTool P2 — Kraft Paper
2 community-tested settings for cut, engrave Kraft Paper on the xTool P2. Always run a test on scrap material first.
Where to buy
Buy the xTool P2 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Kraft Paper on the xTool P2 (55W CO₂ laser). Keep speeds high and power low to avoid burning through; masking tape on the surface reduces scorching around cut edges.
2 settings
Frequently asked questions
What speed should I use to cut Kraft Paper on the xTool P2?
The top-rated community setting uses 180 mm/s at 8% power. Kraft paper. Fast cut at low power - CO2 is very efficient on paper.
How many passes does the xTool P2 need to cut Kraft Paper?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Kraft Paper on the xTool P2?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Kraft Paper on the xTool P2?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
What software do I use with the xTool P2 for Kraft Paper?
The xTool P2 works with xTool Creative Space. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Kraft Paper
Templates ready to cut on your xTool P2 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris