xTool S1 40W — 6mm Baltic Birch Plywood
1 community-tested setting for cut 6mm Baltic Birch Plywood on the xTool S1 40W. Always run a test on scrap material first.
Where to buy
Buy the xTool S1 40W — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 1 setting cover cut 6mm Baltic Birch Plywood on the xTool S1 40W (40W diode laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece. Some settings use multiple passes for a cleaner cut — pin or tape your material flat before running to prevent shift between passes.
1 setting
Frequently asked questions
What speed should I use to cut 6mm Baltic Birch Plywood on the xTool S1 40W?
The top-rated community setting uses 240 mm/min at 100% power, 2 passes. Two passes at full power. Air assist critical on thick ply.
How many passes does the xTool S1 40W need to cut 6mm Baltic Birch Plywood?
Settings here range from 2 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for 6mm Baltic Birch Plywood on the xTool S1 40W?
Yes — 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the xTool S1 40W for 6mm Baltic Birch Plywood?
The xTool S1 40W works with xTool Creative Space and LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with 6mm Baltic Birch Plywood
Templates ready to cut on your xTool S1 40W once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris