xTool S1 40W — Cardstock 160gsm
2 community-tested settings for engrave, cut Cardstock 160gsm on the xTool S1 40W. Always run a test on scrap material first.
Where to buy
Buy the xTool S1 40W — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut Cardstock 160gsm on the xTool S1 40W (40W diode laser). Keep speeds high and power low to avoid burning through; masking tape on the surface reduces scorching around cut edges.
2 settings
Frequently asked questions
What speed should I use to engrave Cardstock 160gsm on the xTool S1 40W?
The top-rated community setting uses 9000 mm/min at 25% power. Very light touch for surface marking on card.
How many passes does the xTool S1 40W need to cut Cardstock 160gsm?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Cardstock 160gsm on the xTool S1 40W?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Cardstock 160gsm on the xTool S1 40W?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
What software do I use with the xTool S1 40W for Cardstock 160gsm?
The xTool S1 40W works with xTool Creative Space and LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Cardstock 160gsm
Templates ready to cut on your xTool S1 40W once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris